home

news
new innovations

articles
diy instructions
your projects
ideas
urban influence
use green

forum
greenstore
links
contribute


 

Fisher and Paykel Generators/Alternators.


The are a couple of extra things you might want to do to improve the performance of you generator.

Decogging.
When you first run these you might fine there is a fair amount of internal resistance and there main thing you can do to improve it is trim these plastic edges down.

When and if you do this you must be very careful not to damage the wires, so if you are after a quick, no danger of damage fix, then grab a belt sander or something similar and run it over each gap for a moment, to make the stator rounder.

A better solution, but you must be very careful is to sand each edge individually like below.

Back to the main Fisher and Paykel page.
 

[ give feedback ]              [ subscribe to news ]              [ email yourgreendream ]