new innovations

diy instructions
your projects
urban influence
use green



Greg's Wind Turbine Blades.

Greg Cook has sent in some brilliant pictures of his 1 meter blades that he has carved from our instructions here. Have a look below at how each step turned out and the fantastic end product. As a thanks we have sent Greg a little gift.

The first cut, getting the rough shape.
First Cut

The second cut, getting the sharp shape near the base..
Second Cut

The first plane and sand, to get the front face done.
First Plane

The Third Cut, turning it over to get the rough shape of the back.
First Plane

The second plane and sand, getting that nice 'plane wing' shape to the back of the blades.
Bottom Done

Final product, a finished blade.
Finished Top
Finished Bottom

Thanks again Greg.

Rated -27.9/5 by 2639 people.         Rate this - terrible    bad    ok    good    great

[ give feedback ]              [ subscribe to news ]              [ email yourgreendream ]